| Contact Us | ||||
| Email Us | ||||
| Call: | ||||
| Online Customers | 877.744.1179 | Custom Systems | 303.744.1179 | |
| Denver Store | 303.778.0780 | Commercial A/V | 303.778.0949 | |
| Boulder Store | 303.444.0479 | Wholesale | 888.547.8687 | |
| Colorado Springs Store | 719.633.2600 | Service | 303.778.1214 | |
Pro-Ject Debut III Red: High quality turntable with a surprisingly low price
The Pro-Ject Debut III in Red is an excellent choice for the audiophile seeking a cost-effective vinyl playback solution.
- A silent running AC motor with two-step metal pulley drives the hub and platter via a flat-ground belt
- The medium density fiber plinth uses four shock absorbing feet
- Drive motor is decoupled from the plinth to reduce vibration transmission
- The nearly three pound sheet-steel sandwiched platter provides excellent speed stability and protects records with a felt mat
- A precision chrome-plated stainless-steel axle couples the platter to a polished ball bearing in a brass housing for low resistance and ultra-quiet rotation
- An external power supply reduces the chance of electro-mechanical interference
- Both the 8.6 inch tonearm and fixed headshell are constructed from a single piece of aluminum for superior rigidity and low resonance
A felt-covered steel platter mates to a chrome plated stainless-steel axle running in a brass bearing housing for exceptional speed, stability and accuracy. The aluminum tonearm employs inverted hardened stainless-steel points for superior tracking with the supplied phono cartridge.
The Debut III also includes a pre-installed Ortofon OM-5 MM cartridge, making this turntable a complete package. Everything is set-up for you at the factory, so once you bring one home you'll be spinning LPs within minutes. For less than you think, you can get those old LPs out of the closet, attic or basement and start having fun with analog again.
Turntable
- 2.9-lb. balanced steel platter with felt mat
- Bearing Block 3: Low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing housing
- Motor decoupled to reduce vibration
- Special resonance-damping feet
Tonearm
- 8.6-inch tone-arm with aluminum headshell made out of one piece
- Inverted tonearm bearing comprises inverted hardened stainlesss teel points and sapphire thrust-pads
- Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell
- Silicon damped tone-armlift
Cartridge
- Ortofon OM5e
Buy with Confidence
ListenUp is an authorized dealer for every manufacturer we carry, and your satisfaction is guaranteed. We've created thousands of loyal and enthusiastic customers since 1972.
|
Your Price: $399.00 Free Ground
|
Phono Cartridge: Ortofon OM 5E MM Supplied
Noise Floor: 88dB
THD: 0.005%
Input Impedance: 47k ohms/100pf
Power Consumption: 16V/40mA AC
Gain: 32dB
Output Voltage: 160mV/1kHz at 4mV/1kHz
RIAA EQ Curve Accuracy: 20Hz – 20kHz, > 0.5db
Dustcover: Supplied
br> Dimensions (W x H x D, in inches) 16.5 x 4.5 x 13.25 dustcover down
Weight: 14 lbs.
Buy with Confidence
ListenUp is an authorized dealer for every manufacturer we carry, and your satisfaction is guaranteed. We've created thousands of loyal and enthusiastic customers since 1972.
|
Your Price: $399.00 Free Ground
|
Buy with Confidence
ListenUp is an authorized dealer for every manufacturer we carry, and your satisfaction is guaranteed. We've created thousands of loyal and enthusiastic customers since 1972.
|
Your Price: $399.00 Free Ground
|
(edit) |
|
Your basket is empty |
and closeouts.










