Audioquest SUB-1 (4.5 Meter)

This is the place for better bass

Fast Facts
The Audioquest SUB-1 is the easy way to dramatically increase your subwoofer's performance.

• Uses three solid 2.5% silver conductors, eliminating strand-interaction distortion
• Conductors are housed inside PE Air Tubes, which produces significantly less information smearing than solid or foam insulation
• Silver-plated RCA plugs or XLR plugs are welded to the cable using 8,000 amperes
• Includes a chassis ground wire

  Deeper, more accurate low-frequency sound
  AudioQuest's SUB-1 cable uses three solid 2.5% silver conductors inside PE Air Tubes. These solid conductors eliminate strand-interaction distortion, and the PE Air Tubes minimize information smearing caused by any solid or foam insulation. Three conductors insure optimum conductivity, while the 100% coverage shield insures noise-free performance. Silver-plated plugs are welded to the SUB-1 using 8,000 amperes for the best possible connection.

  Silver as a solution for subs
  Silver-Plated Copper (SPC) always provides superior performance for video and digital audio. When used for full range analog audio, however, the discontinuity of plating silver over copper causes high frequencies to sound edgy and harsh. Interestingly, though, when used only for subwoofer frequencies, SPC's "artificial edge" actually enhances the articulation and intelligibility of low frequency information, so it's the perfect material for subwoofer cable

  PERFORMANCE NOTES: If you hear noticeable hum in your system after connecting your subwoofer, please attach SUB-1's extra tails. Some equipment has a ground (GND) connection on the back-panel, if not, attach the little spade lugs to any screw on the equipment chassis of both the source and the subwoofer.

  The SUB-1 cable is not intended to be used as a full range audio cable.